Nitecore TIKI GITD

The Nitecore TIKI GITD keyring light features a phosphorescent shell which will glow in the dark. The torch has a maximum output of 300 lumens from the primary OSRAM P8 LED with a reflective optic lens emitting a soft, uniform beam.

As with the Nitecore TIKI and TIKI LE torches, the TIKI GITD also offers two auxiliary emitters on the side of the light, a high CRI white LED and a 500mW, 365nm UV LED. The high CRI output is perfect for camping or reading and provides excellent colour rendition. The UV LED can be used as a detector of counterfeit notes and forged documents.

In addition to the multiple light sources, the main LED features four brightness levels ranging from 1 to 300 lumens. All the modes and outputs are operated using the single side switch.

The Nitecore TIKI GITD has a built-in 130mAh Li-ion battery which is rechargeable via a USB-C port at the base of the light, allowing for fast, convenient charging. The keyring torch has multiple charging safeguards including overcharge protection, over-discharge protection and short circuit protection, plus a blue charging indicator that turns off when the battery is fully charged.

Brightness Levels:

• High: 300 lumens - 30 mins runtime
• Mid: 60 lumens - 1 hr runtime
• Low: 15 lumens - 4 hrs runtime
• Ultralow: 1 lumen - 40 hrs runtime
• UV: 500mW - 45 mins runtime
• Aux White Constant: 22 lumens - 1 hr 30 mins runtime
• Aux White Flashing: 22 lumens - 20 hrs runtime

Maximum beam distance 71 meters, waterproof to IP66 and resistant to impacts up to 1 meter.

Includes: Key Ring Clasp

Operation: Intuitive user interface with direct momentary access to high level by pressing and holding power button from the off position – release to turn off.

Double press for constant-on prevents accidental operation:

On: When the light is off, double press the power button to access Ultra Low primary white light

Off: When the light is on, long press power button to turn off

When the light is on short press of the power button cycles though the white light brightness levels.

Triple press for auxiliary lights:

When one of the auxiliary lights is on, short press the power button to cycle through UV, Aux White and Flashing Aux White.